Manual taper tap Ruko hand tap HSS DIN 2181 UNF taper tap
Hand tap HSS DIN 2181 UNF taper Ruko
HNDTAP-RUKO-246080UNF1-HSS-NO.8
Register now and access more than 125,000 products
Datasheets(X)
For through threads and blind hole threads, in unalloyed and low-alloy steels up to 800 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 2181 |
Thread type x nominal diameter | UNF4.166 |
Length | 40 mm |
Thread length (metric thread) | 12 mm |
Material | HSS |
Thread type | UNF |
Last viewed
GPN 690 protective cap Polyethylene (PE-LD/PE-LLD), yellow
Work shorts
Adjustable T-shaped sealing cone fitting ISO 8434-1, zinc-nickel-plated steel, cutting ring connection with o-ring
T-piece, reduced with solder connection EN1254, copper, 5130R
Safety boots, S3
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)
EPS profile double cylinder
Flat head tapping screw, type C with hexagon socket ISO 14585, steel, zinc-plated, blue passivated, shape C (with tip)