Manual taper tap Ruko hand tap HSS DIN 2181 UNF taper tap
Hand tap HSS DIN 2181 UNF taper Ruko
HNDTAP-RUKO-246138UNF1-HSS-13/8ZO
Register now and access more than 125,000 products
Datasheets(X)
For through threads and blind hole threads, in unalloyed and low-alloy steels up to 800 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 2181 |
Thread type x nominal diameter | UNF1-3/8 |
Length | 132 mm |
Thread length (metric thread) | 56.0 mm |
Material | HSS |
Thread type | UNF |
Last viewed
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, plain
Low-cut safety shoes, S1
ASSY® 4 PII CSMP universal screw Steel zinc-plated partial thread with underhead thread milling pocket head
Folding trolley with drawbar
Outer corner For FB windowsill duct
Lock washer DIN 128, steel, mechanically applied zinc coating (MZN)
Split pin ISO 1234 A4-70 stainless steel, plain
Hexagonal bolt, fully threaded, SB fittings, DIN EN 15048-1
Wood screw, DIN 96 Half moon head with slot
Hexagonal cap nut, high profile with thread undercut