Manual taper tap Ruko hand tap HSS DIN 2181 UNF taper tap
Hand tap HSS DIN 2181 UNF taper Ruko
HNDTAP-RUKO-246916UNF1-HSS-9/16ZO
Art.-no. 1971005455
EAN 4007140101532
Register now and access more than 125,000 products
Datasheets(X)
For through threads and blind hole threads, in unalloyed and low-alloy steels up to 800 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 2181 |
Thread type x nominal diameter | UNF9/16 |
Length | 80 mm |
Thread length (metric thread) | 28.0 mm |
Material | HSS |
Thread type | UNF |
Last viewed
Ducting clamp DIN3015-3, double series, smooth inner surface, W.TEC series
Hexagon bolt with shank DIN 931, steel 12.9, plain
Solid carbide ball nose end mill DIN 6527L long, twin blade with reinforced shank
Flat washer - extra-large series ISO 7094 steel 100 HV, hot-dip galvanised
Flat washer For hexagon head bolts and nuts DIN 125, A4 stainless steel
Metric ratcheting combination wrench with POWERDRIV® drive
Hexagon bolt with shank ISO 4014, A4-50 and A4-70 stainless steel, plain
Square plug GPN 260 Q
Start Sleeve for cable feed devices
Hexagon bolt with thread up to the head ISO 4017, steel 10.9, plain