Manual taper tap Ruko hand tap HSS DIN 2181 fine thread taper tap
Hand tap HSS DIN 2181 fine thread taper Ruko
HNDTAP-RUKO-235040-1-HSS-MF4X0,35
Register now and access more than 125,000 products
For through threads and blind hole threads, in unalloyed and low-alloy steels up to 800 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 2181 |
Thread type x nominal diameter | MF4 |
Pitch | 0.35 mm |
Length | 45 mm |
Thread length (metric thread) | 10.0 mm |
Material | HSS |
Thread type | Metric fine thread |
Datasheets(X)
Last viewed
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, plain
O-ring, metric
1-inch impact socket wrench insert hexagon, metric, short
EPS profile double cylinder
Straight pin with flat points DIN 7, steel plain (9 SMnPb 28 k or St 50 K), unhardened, tolerance class h8
Cable clamp, plastic
Hexagonal bolt with thread up to the head DIN 933, A4 stainless steel, plain
Countersunk head screw with recessed head, H DIN 965, A2 stainless steel, plain
Work trousers
Abrasive fleece roll VSM KV301
