Manual taper tap Ruko hand tap HSS DIN 2181 fine thread taper tap
Hand tap HSS DIN 2181 fine thread taper Ruko
HNDTAP-RUKO-235060-1-HSS-MF6X0,75
Register now and access more than 125,000 products
Datasheets(X)
For through threads and blind hole threads, in unalloyed and low-alloy steels up to 800 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 2181 |
Thread type x nominal diameter | MF6 |
Pitch | 0.75 mm |
Length | 50 mm |
Thread length (metric thread) | 15.0 mm |
Material | HSS |
Thread type | Metric fine thread |
Last viewed
Stud with threaded end ≈ 1 d DIN 938, steel 8.8, plain
Flat washer without chamfer ISO 7089 steel 200 HV, zinc-plated, blue passivated (A2K)
Checker plate box
Universal snips
Cheese head screw With hexagon socket
Nylon Sanding Fleece Disc for interchangeable clamping mandrel
Stretch X ladies' softshell jacket
Spiral clamping pin, standard design ISO 8750 steel plain
Hammer drill bit Max Quadro-L Vario
EPS profile double cylinder