Manual taper tap Ruko hand tap HSS DIN 2181 fine thread taper tap
Hand tap HSS DIN 2181 fine thread taper Ruko
HNDTAP-RUKO-235102-1-HSS-MF10X0,75
Register now and access more than 125,000 products
Datasheets(X)
For through threads and blind hole threads, in unalloyed and low-alloy steels up to 800 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 2181 |
Thread type x nominal diameter | MF10 |
Pitch | 0.75 mm |
Length | 63 mm |
Thread length (metric thread) | 20.0 mm |
Material | HSS |
Thread type | Metric fine thread |
Last viewed
DUO-S impact drill bit with straight shank
3/8 inch extension
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Body Sealing Plugs
Clamping pin/clamping sleeve
Brother label tape cassette for labellers
Twist drill bit HSS DIN 340 type RN 130°
Eye bolt with full thread DIN 444, steel 8.8, plain, shape LB
Hexagon head bolt with shank for pressure container construction (PED) ISO 4014, steel 25CrMo4, plain
Stud with threaded end ≈ 1.25 d DIN 939, A2 stainless steel, plain