Manual taper tap Ruko hand tap HSS DIN 2181 fine thread taper tap
Hand tap HSS DIN 2181 fine thread taper Ruko
HNDTAP-RUKO-235110-1-HSS-MF11X1,00
Register now and access more than 125,000 products
Datasheets(X)
For through threads and blind hole threads, in unalloyed and low-alloy steels up to 800 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 2181 |
Thread type x nominal diameter | MF2 |
Pitch | 1 mm |
Length | 63 mm |
Thread length (metric thread) | 20 mm |
Material | HSS |
Thread type | Metric fine thread |
Last viewed
Low-cut safety shoes S3
Clamping pin/clamping sleeve ISO 13337 spring steel plain
Hexagon nut with clamping piece (non-metal insert) ISO 7040, A2-70 stainless steel, plain
Knob cylinder 3KS
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
GEFU® thread-rolling screw With Taptite 2000® thread, hexagon head with collar and hexalobular drive (TXplus)
Slide plate with weld-on nut
Pressure screw For Basic quick-action clamp
Hexagonal bolt with shank
Storage compartment For square holes in perforated plates, workshop trolleys and the ORSY®1 shelving systems