Manual taper tap Ruko hand tap HSS DIN 2181 fine thread taper tap
Hand tap HSS DIN 2181 fine thread taper Ruko
HNDTAP-RUKO-235122-1-HSS-MF12X1,00
Register now and access more than 125,000 products
Datasheets(X)
For through threads and blind hole threads, in unalloyed and low-alloy steels up to 800 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 2181 |
Thread type x nominal diameter | MF12 |
Pitch | 1.00 mm |
Length | 70 mm |
Thread length (metric thread) | 20.0 mm |
Material | HSS |
Thread type | Metric fine thread |
Last viewed
WÜPLAST® countersunk head screw with hexagon socket WN 1423, steel 10.9, zinc-nickel-plated, transparent passivated (P3E)
L-shaped push-in fitting, long version
Hexagonal bolt with thread up to the head
Vulcanised fibre disc Klingspor CS 565
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Spiral clamping pin, standard design ISO 8750 steel plain
Countersunk head screw with recessed head, H DIN 965, steel 8.8, zinc-plated, blue passivated (A2K)
O-ring, metric
Adjustable L-shaped sealing cone fitting ISO 8434-1, stainless steel 1.4571, cutting ring connection with o-ring