Manual taper tap Ruko hand tap HSS DIN 2181 fine thread taper tap
Hand tap HSS DIN 2181 fine thread taper Ruko
HNDTAP-RUKO-235140-1-HSS-MF14X1,25
Register now and access more than 125,000 products
Datasheets(X)
For through threads and blind hole threads, in unalloyed and low-alloy steels up to 800 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 2181 |
Thread type x nominal diameter | MF14 |
Pitch | 1.25 mm |
Length | 70 mm |
Thread length (metric thread) | 20 mm |
Material | HSS |
Thread type | Metric fine thread |
Last viewed
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Countersunk head screw with recessed head, H DIN 965, steel 4.8, nickel-plated (E2J)
Wedge lock washer, W.TEC series, wide shape
Hexagonal bolt with shank
HDPE UV fold masker
Sealing plug W.TEC® COVER CAP WP 300 F Polyethylene, natural
Fit bolt, hexagon head
Hexagonal bolt with shank DIN 931, steel 10.9, zinc-plated, blue passivated (A2K)
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)