Manual taper tap Ruko hand tap HSS DIN 2181 fine thread taper tap
Hand tap HSS DIN 2181 fine thread taper Ruko
HNDTAP-RUKO-235141-1-HSS-MF14X1,50
Register now and access more than 125,000 products
Datasheets(X)
For through threads and blind hole threads, in unalloyed and low-alloy steels up to 800 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 2181 |
Thread type x nominal diameter | MF14 |
Pitch | 1.50 mm |
Length | 70 mm |
Thread length (metric thread) | 20.0 mm |
Material | HSS |
Thread type | Metric fine thread |
Last viewed
Song Plus S1P safety shoes
GEFU® thread-rolling screw With Taptite 2000® thread, hexagon head with collar and hexalobular drive (TXplus)
Copper brazing solder no. 94 DIN EN 1044, ISO 3677, B-Cu94P
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Timber reviver B
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Hexagon nut, inch
Low-cut safety shoes, S3
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Tapered pin, unhardened DIN 1, plain steel, unhardened, design A (ground)