Manual taper tap Ruko hand tap HSS DIN 2181 fine thread taper tap
Hand tap HSS DIN 2181 fine thread taper Ruko
HNDTAP-RUKO-235280-1-HSS-MF28X1,50
Register now and access more than 125,000 products
Datasheets(X)
For through threads and blind hole threads, in unalloyed and low-alloy steels up to 800 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 2181 |
Thread type x nominal diameter | MF28 |
Pitch | 1.50 mm |
Length | 90 mm |
Thread length (metric thread) | 22 mm |
Material | HSS |
Thread type | Metric fine thread |
Last viewed
Wood screw, countersunk head DIN 97 Countersunk head, slotted
Connecting technology
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Centre-grooved dowel pins ISO 8742 steel plain
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
pias® drilling screw, flat head with AW drive
Chemical protective glove
SAE J1508 type F worm gear stainless steel
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Countersunk tapping screw shape C with H recessed head DIN 7982, steel, zinc-plated, blue passivated (A2K)