Manual taper tap Ruko hand tap HSS DIN 352 UNC taper tap
Hand tap HSS DIN 352 UNC taper Ruko
HNDTAP-RUKO-246030UNC1-HSS-NO.3
Register now and access more than 125,000 products
Datasheets(X)
For through threads and blind hole threads, in unalloyed and low-alloy steels up to 800 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 352 |
Thread type x nominal diameter | UNC2.515 |
Length | 36 mm |
Thread length (metric thread) | 11 mm |
Material | HSS |
Thread type | UNC |
Last viewed
Low-cut safety shoes, S1
Hexagon shoulder screw with short threaded pin DIN 610, steel 8.8, plain
Protective jaw Prism
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262
Stretch X softshell jacket
Hexagonal bolt with shank DIN 601/ISO 4016, steel 4.8, zinc-plated, blue passivated (A2K), with nut
Flat washer with chamfer ISO 7090, steel, 200 HV, zinc-nickel-plated black (ZFSH)
Tap extension EN1254, gunmetal, 3540
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Protective jaw Polyurethane