Manual taper tap Ruko hand tap HSS DIN 352 UNC taper tap
Hand tap HSS DIN 352 UNC taper Ruko
HNDTAP-RUKO-246034UNC1-HSS-3/4ZO
Register now and access more than 125,000 products
Datasheets(X)
For through threads and blind hole threads, in unalloyed and low-alloy steels up to 800 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 352 |
Thread type x nominal diameter | UNC3/4 |
Length | 95 mm |
Thread length (metric thread) | 40 mm |
Material | HSS |
Thread type | UNC |
Last viewed
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Identification rings, PVC
System insert, unprocessed foam
Hexagon socket set screw with flattened tip ISO 4027, A2 stainless steel, 21H, plain
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
ASSY®plus 4 A2 CSMR universal screw A2 stainless steel plain, partial thread, countersunk milling head
Cable tie assortment, metal 800 pieces
Hexagonal bolt with shank
Hexagon socket set screw with ring cutter ISO 4029, A4 stainless steel, 21H, plain
HPC Speedcut 4.0 Inox end mill, long, four blades, uneven angle of twist gradient, with internal cooling, HB shank