Manual taper tap Ruko hand tap HSS DIN 352 UNC taper tap
Hand tap HSS DIN 352 UNC taper Ruko
HNDTAP-RUKO-246716UNC1-HSS-7/16ZO
Register now and access more than 125,000 products
Datasheets(X)
For through threads and blind hole threads, in unalloyed and low-alloy steels up to 800 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 352 |
Thread type x nominal diameter | UNC7/16 |
Length | 70 mm |
Thread length (metric thread) | 24.0 mm |
Material | HSS |
Thread type | UNC |
Last viewed
Safety boots, S3
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Parallel pin, unhardened ISO 2338 steel plain (m6)
SC long twist drill bit DIN 338
Plus Quadro-L Vario hammer drill bit
Sanding system dust-free sanding disc Useit® Superpad F
Hexagonal bolt with shank ISO 4014, A2-80 stainless steel, plain
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 8.8, plain
Key fob Italy
Saddle washer For corrugated profile