Manual taper tap Ruko hand tap HSS DIN 352 Whitworth BSW taper tap
Hand tap HSS DIN 352 Whitworth BSW taper Ruko
HNDTAP-RUKO-246112-1-HSS-11/2ZO-55GRD
Register now and access more than 125,000 products
Datasheets(X)
For through threads and blind hole threads, in unalloyed and low-alloy steels up to 800 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 352 |
Thread type x nominal diameter | BSW1-1/2 |
Length | 150 mm |
Thread length (metric thread) | 63.0 mm |
Material | HSS |
Thread type | Whitworth thread |
Last viewed
Twist drill bit HSS DIN 1897 type RN
Hexagonal bolt with shank ISO 4014, steel 8.8, zinc-nickel-plated, silver (ZNSHL)
Order protector with rip-tape fastening
Backplate for tension anchors, two pieces
Half-shell hexagon crimping insert
TIPP® robust silicone pipe clamp
Engine/transmission support With swivel arms, universal
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, zinc-plated, blue passivated (A2K)
ECOLINE cleaning paper
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain