Manual taper tap Ruko hand tap HSS DIN 352 left-hand thread taper tap
Hand tap HSS DIN 352 l.-hand thread taper Ruko
HNDTAP-RUKO-230040LI-1-HSS-M4X0,70
Register now and access more than 125,000 products
Datasheets(X)
For through threads and blind hole threads, in unalloyed and low-alloy steels up to 800 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 352 |
Thread type x nominal diameter | M-L4 |
Pitch | 0.70 mm |
Length | 45 mm |
Thread length (metric thread) | 12 mm |
Material | HSS |
Thread type | M-L |
Last viewed
Hexagonal bolt with flange
Safety boots, S3
Ducting clamp DIN3015-3, double series, ribbed inner surface, W.TEC series
ECOFAST® chipboard screw
Bonded anchor glass capsule W-VPZ
Round head screw with square neck DIN 603, A4 stainless steel
Hexagonal nut, high profile with clamping piece (non-metal insert) DIN 982, steel 10, zinc-plated, blue passivated (A2K)
Straight pin with flat points DIN 7, steel plain (9 SMnPb 28 k or St 50 K), unhardened, tolerance class h8
VARIFIX® crosswise profile foot for system 41 Power Lock
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)