Manual taper tap Ruko hand tap HSS DIN 352 left-hand thread taper tap
Hand tap HSS DIN 352 l.-hand thread taper Ruko
HNDTAP-RUKO-230050LI-1-HSS-M5X0,80
Register now and access more than 125,000 products
Datasheets(X)
For through threads and blind hole threads, in unalloyed and low-alloy steels up to 800 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 352 |
Thread type x nominal diameter | M-L5 |
Pitch | 0.80 mm |
Length | 50 mm |
Thread length (metric thread) | 13.0 mm |
Material | HSS |
Thread type | M-L |
Last viewed
Hexagon nut ISO 4032 steel 10, zinc-plated blue passivated (A2K)
Accessories, hammers Halder hammer insert Series 3207
Raised countersunk head screw with recessed head, H ISO 7047, A2-70 stainless steel, plain
Hexagonal cap nut, high profile with thread undercut
Hexagonal bolt with flange
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Safety boots, S3
Stretch X softshell jacket
GEFU® thread-rolling screw With Taptite 2000® thread, flattened half round head with collar and hexalobular drive
Hexagonal bolt with shank DIN 931, steel 12.9, plain