Manual taper tap Ruko hand tap HSS DIN 352 taper tap
Hand tap HSS DIN 352 taper Ruko
HNDTAP-RUKO-230045-1-HSS-M4,5X0,75
Register now and access more than 125,000 products
Datasheets(X)
For through threads and blind hole threads, in unalloyed and low-alloy steels up to 800 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 352 |
Thread type x nominal diameter | M4.5 |
Pitch | 0.75 mm |
Length | 50 mm |
Thread length (metric thread) | 16 mm |
Material | HSS |
Thread type | Metric thread |
Last viewed
Screwdriver wood laser tip assortment 5 pieces
Colour – blind rivets Round pan head
High-performance gas unit DIGA® CS-3
Precision wood twist drill bit LONGLIFE & SPEED
Spreader
MacPherson spring strut compressor set
Metric double open-end wrench DIN 3110/ISO 1085
Raised countersunk tapping screw, C shape with H recessed head
Weatherproof trousers
Multi-use bimetal bandsaw blade One blade for any job