Manual taper tap Ruko hand tap HSS DIN 5157 cylindrical pipe thread taper tap
Hand tap HSS DIN 5157 cyl. pipe thr taper Ruko
HNDTAP-RUKO-236114-1-HSS-G11/4ZO-55GRD
Register now and access more than 125,000 products
Datasheets(X)
For through threads and blind hole threads, in unalloyed and low-alloy steels up to 800 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 5157 |
Thread type x nominal diameter | Rp1-1/4 |
Length | 125 mm |
Thread length (metric thread) | 40 mm |
Material | HSS |
Thread type | Cylindrical pipe internal thread Whitworth |
Last viewed
High-performance fastening base for wide-strip cable ties
ASS/AWS M-CUBE 2-in-1 case set 5 pieces
EPS profile double cylinder
Jacket Planam Highline ladies'
Flat nut with small width across flats, fine thread
Work dungarees
Self-tapping screws, countersunk head assortment 2,408 pieces
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Sweatshirt Job+
Stud with threaded end ≈ 1 d DIN 938, A2/70 stainless steel, plain