Manual taper tap Ruko hand tap HSS DIN 5157 cylindrical pipe thread taper tap
Hand tap HSS DIN 5157 cyl. pipe thr taper Ruko
HNDTAP-RUKO-236118-1-HSS-G11/8ZO-55GRD
Register now and access more than 125,000 products
Datasheets(X)
For through threads and blind hole threads, in unalloyed and low-alloy steels up to 800 N/mm² strength, malleable iron and non-ferrous metals.
Standards | DIN 5157 |
Thread type x nominal diameter | Rp1-1/8 |
Length | 125 mm |
Thread length (metric thread) | 40 mm |
Material | HSS |
Thread type | Cylindrical pipe internal thread Whitworth |
Last viewed
Circlips for shaft, shape A
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Grooved cylindrical pin with chamfer ISO 8740, A1 stainless steel
Adapter for hose Sundström T06-5001
Insect remover
Quick-action lever clamp made completely of steel
Hexagonal bolt, with thread to head and fine thread DIN 961, steel 10.9, plain
Straight male fitting ISO 8434-1, stainless steel 1.4571, tapered BSPT male thread
Shim ring DIN 988, steel, plain
Ratchet combination wrench Multi-profile for five screw head drives