Metal core drill bit Ruko 10815 solid carbide Tecrona Weldon holder
Core drill bit SC Tecrona Weldon chuck 10815 Ruko
CREDRL-RUKO-1081520C-TC-L63-D20
Register now and access more than 125,000 products
The Tecrona coating is the ideal coating for all drilling operations that place extreme stress on the tool. It adheres very well to the tool, which causes the wear protection coating to increase the surface hardness to approx. 4200 HV. The friction value is extremely low with this coating, which increases the service life with low wear.
Application on all rail drills. The cutting edge geometry has been optimised especially for heavy cutting of railway rails and thus facilitates economic application.
Datasheets(X)
RUKO core drills with Tecrona coating and carbide cutting edges are universally usable for non-hardened steels and superalloys (materials with very high alloying proportions of AL, Ti, nickel such as Inconel, Husteloy, Inox).
Quality | 0 - not applicable |
Cutting depth | 30.0 mm |
Diameter | 20.0 mm |
Length | 63 mm |
Shank style | Weldon |
Cutting material | SC |
Last viewed
Welding blanket
Blind rivet, open, with break mandrel and flat head ISO 15977, dome head, aluminium/steel
Interior trim clip, type 3
Straight male fitting ISO 8434-1, zinc-nickel-plated steel, metric male thread with seal
Wood screw, DIN 96 A2 Half moon head with slot
S1PL safety shoe Uvex1 x-craft pro
Shrink torch
Hex head screw with shank ISO 4014, steel 8.8U, hot-dip galvanised
Countersunk tapping screw shape F with H recessed head DIN 7982, steel, zinc-plated, blue passivated (A2K)
Work trousers