Metal core drill bit Ruko 10815 solid carbide Tecrona Weldon holder
Core drill bit SC Tecrona Weldon chuck 10815 Ruko
CREDRL-RUKO-1081522C-TC-L63-D22
Register now and access more than 125,000 products
The Tecrona coating is the ideal coating for all drilling operations that place extreme stress on the tool. It adheres very well to the tool, which causes the wear protection coating to increase the surface hardness to approx. 4200 HV. The friction value is extremely low with this coating, which increases the service life with low wear.
Application on all rail drills. The cutting edge geometry has been optimised especially for heavy cutting of railway rails and thus facilitates economic application.
Datasheets(X)
RUKO core drills with Tecrona coating and carbide cutting edges are universally usable for non-hardened steels and superalloys (materials with very high alloying proportions of AL, Ti, nickel such as Inconel, Husteloy, Inox).
Cutting depth | 30 mm |
Diameter | 22 mm |
Length | 63 mm |
Shank style | Weldon |
Cutting material | SC |
Last viewed
Hexagonal bolt with shank ISO 4014, steel 10.9, plain
Shoe accessories
Slotted cheese head DIN 84, A2 stainless steel, plain
Cross cut chisel In line with DIN 6451
Fixanchor W-FA/A4
Wire nail DIN 1151, steel, plain
Wall-mounted cabinet For key storage
Thread extractor assortment/set 25 pieces Ruko 244151
ISO 4762 steel 12.9, zinc flake, silver (ZFSHR)
Dry sandpaper strip Klingspor PL 31 B