Metal core drill bit Ruko 10815 solid carbide Tecrona Weldon holder
Core drill bit SC Tecrona Weldon chuck 10815 Ruko
CREDRL-RUKO-1081524C-TC-L63-D24
Register now and access more than 125,000 products
The Tecrona coating is the ideal coating for all drilling operations that place extreme stress on the tool. It adheres very well to the tool, which causes the wear protection coating to increase the surface hardness to approx. 4200 HV. The friction value is extremely low with this coating, which increases the service life with low wear.
Application on all rail drills. The cutting edge geometry has been optimised especially for heavy cutting of railway rails and thus facilitates economic application.
Datasheets(X)
RUKO core drills with Tecrona coating and carbide cutting edges are universally usable for non-hardened steels and superalloys (materials with very high alloying proportions of AL, Ti, nickel such as Inconel, Husteloy, Inox).
Cutting depth | 30.0 mm |
Diameter | 24.0 mm |
Length | 63 mm |
Shank style | Weldon |
Cutting material | SC |
Last viewed
Countersunk tapping screw, shape C with slot DIN 7972, A2 stainless steel
Work jacket
Outer corner For LFK cable routing conduit
Polyester coils, 5.3 mm, wound 3-way twisted with Powerglider
Work vest
Work vest
Wood screw, DIN 96 Half moon head with slot
Steering wheel For Compact workshop trolley, swivelling with brake
Slot-in frame
Welded stud