Metal core drill bit Ruko 10815 solid carbide Tecrona Weldon holder
Core drill bit SC Tecrona Weldon chuck 10815 Ruko
CREDRL-RUKO-1081525C-TC-L63-D25
Register now and access more than 125,000 products
The Tecrona coating is the ideal coating for all drilling operations that place extreme stress on the tool. It adheres very well to the tool, which causes the wear protection coating to increase the surface hardness to approx. 4200 HV. The friction value is extremely low with this coating, which increases the service life with low wear.
Application on all rail drills. The cutting edge geometry has been optimised especially for heavy cutting of railway rails and thus facilitates economic application.
Datasheets(X)
RUKO core drills with Tecrona coating and carbide cutting edges are universally usable for non-hardened steels and superalloys (materials with very high alloying proportions of AL, Ti, nickel such as Inconel, Husteloy, Inox).
Cutting depth | 30.0 mm |
Diameter | 25.0 mm |
Length | 63 mm |
Shank style | Weldon |
Cutting material | SC |
Last viewed
Die For standard metric ISO thread HSCo Multi Performance
Wedge lock washer, W.TEC series, wide shape
HSCo Multi Longlife machine tap for through holes DIN 371/376
Cylindrical pins with female thread, hardened ISO 8735, steel, plain, type A, hardened (with chamfer and taper)
Screw with flattened half round head with collar and hexagon socket ISO 7380-2, A2-070 stainless steel, plain
Threaded fitting
Soft-face hammer Halder SIMPLEX soft-face hammer Series 3734
Multi-Tester Pro II LCD two-pin voltage tester
Lock plate with tabs
Work shirt HAKRO 281 T-shirt MIKRALINAR®