Metal core drill bit Ruko 10815 solid carbide Tecrona Weldon holder
Core drill bit SC Tecrona Weldon chuck 10815 Ruko
CREDRL-RUKO-1081526C-TC-L63-D26
Register now and access more than 125,000 products
The Tecrona coating is the ideal coating for all drilling operations that place extreme stress on the tool. It adheres very well to the tool, which causes the wear protection coating to increase the surface hardness to approx. 4200 HV. The friction value is extremely low with this coating, which increases the service life with low wear.
Application on all rail drills. The cutting edge geometry has been optimised especially for heavy cutting of railway rails and thus facilitates economic application.
Datasheets(X)
RUKO core drills with Tecrona coating and carbide cutting edges are universally usable for non-hardened steels and superalloys (materials with very high alloying proportions of AL, Ti, nickel such as Inconel, Husteloy, Inox).
Cutting depth | 30.0 mm |
Diameter | 26.0 mm |
Length | 63 mm |
Shank style | Weldon |
Cutting material | SC |
Last viewed
Slotted cheese head DIN 84, brass, plain
SC short twist drill bit DIN 6539
Work pullover Men's sweatshirt JN8022
ZD 2 door handle pair
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262
Safety boots, S3
Hexagon Socket Head Cap Screw with serration ISO 4762 with teeth under head, A2-70, plain
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
AL 90 renovation plate