Metal core drill bit Ruko HSS TiAlN Weldon holder
Core drill bit HSS TiAlN Weldon chuck Ruko
CREDRL-RUKO-108230F-HSS-L63-D30
Register now and access more than 125,000 products
The TiAlN wear protection coating increases the surface hardness of the tool to approx. 3000 HV/microhardness and heat resistance to up to 900°C. It is characterised by high toughness and high thermal and chemical stability and serves to achieve higher tool life and cutting values.
Can be used in all upright and magnetic column drills with morse taper in conjunction with RUKO attachment holder no. 108 302 / 108 303 / 108 315 / 108 316, RUKO EasyLock No. 108 312 / 108 313 / 108 314 or with direct Weldon shaft attachment such as RUKO magnetic column drill RS5e/RS10.
Particularly suitable for the machining of unalloyed and alloyed steels (up to 1200 N/mm²), high-chromium alloy steels such as V2A and V4A, as well as cast steel and tough brass.
Cutting depth | 30 mm |
Diameter | 30.0 mm |
Length | 63 mm |
Shank style | Weldon |
Surface | TiAlN |
Cutting material | HSS |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Sealing plug W.TEC® COVER CAP WP 300 F Polyethylene, natural
Half cylinder S5 locking system
Hexagonal bolt with shank ISO 4014, steel 10.9, plain
Hexagon shoulder screw with short threaded pin DIN 610, steel 8.8, plain
Hexagon nut, low profile with fine thread
Work dungarees Nitras Motion Tex Plus 7621
Work vest
Round head screw with square neck DIN 603, A4 stainless steel
Safety boots, S3
Clamping pin/clamping sleeve ISO 13337 spring steel plain
