Metal core drill bit Ruko solid carbide Tecrona QuickIN holder
Core drill bit SC Tecrona QuickIN chuck Ruko
CREDRL-RUKO-1081125C-TC-L83-D25
Register now and access more than 125,000 products
The Tecrona coating is the ideal coating for all drilling operations that place extreme stress on the tool. It adheres very well to the tool, which causes the wear protection coating to increase the surface hardness to approx. 4200 HV. The friction value is extremely low with this coating, which increases the service life with low wear.
Can be used in all upright and magnetic column drills with morse taper in conjunction with RUKO attachment holder no. 108 302 / 108 303 / 108 315 / 108 316, RUKO EasyLock No. 108 312 / 108 313 / 108 314 or with direct Weldon shaft attachment such as RUKO magnetic column drill RS5e/RS10.
Datasheets(X)
RUKO core drills with Tecrona coating and carbide cutting edges are universally usable for non-hardened steels and superalloys (materials with very high alloying proportions of AL, Ti, nickel such as Inconel, Husteloy, Inox).
Cutting depth | 35 mm |
Diameter | 25 mm |
Length | 83 mm |
Shank style | QuickIN |
Cutting material | SC |
Last viewed
Screw with flattened half round head and hexagon socket ISO 7380-1 A4-070 stainless steel, plain
Protective glove, nitrile
Hexagonal bolt, with thread to head and fine thread
Weld stud PS-shape
Spindle-mounted round wheel brush drill Klingspor BRS 600 W
Work poloshirt
Flat-head screw with H cross recess ISO 7045, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt, with thread to head and fine thread ISO 8676, steel 8.8, plain
Countersunk screw with hexagon socket head DIN 7991, steel 010.9, zinc-plated, blue passivated (A2K)
Work dungarees