Metal core drill bit Ruko solid carbide Tecrona Weldon holder
Core drill bit SC Tecrona Weldon chuck 1087 Ruko
CREDRL-RUKO-108743C-TC-L84-D43
Register now and access more than 125,000 products
The Tecrona coating is the ideal coating for all drilling operations that place extreme stress on the tool. It adheres very well to the tool, which causes the wear protection coating to increase the surface hardness to approx. 4200 HV. The friction value is extremely low with this coating, which increases the service life with low wear.
Can be used in all upright and magnetic column drills with morse taper in conjunction with RUKO attachment holder no. 108 302 / 108 303 / 108 315 / 108 316, RUKO EasyLock No. 108 312 / 108 313 / 108 314 or with direct Weldon shaft attachment such as RUKO magnetic column drill RS5e/RS10.
Datasheets(X)
RUKO core drills with Tecrona coating and carbide cutting edges are universally usable for non-hardened steels and superalloys (materials with very high alloying proportions of AL, Ti, nickel such as Inconel, Husteloy, Inox).
Cutting depth | 50 mm |
Diameter | 43 mm |
Length | 84 mm |
Shank style | Weldon |
Cutting material | SC |
Last viewed
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain
Plastic heat pump pipe
PRO compartment divider set
Hexagonal bolt with shank for pressure container construction ISO 4014, steel 5.6, zinc-plated, blue passivated (A2K)
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 8.8, plain
L-shaped push-in fitting with male and female thread
Work jacket
Work dungarees
S1PL safety shoe New Balance Elite Lite Womens
Sanding belt, wide VSM KK718X