Metal core drill bit Ruko solid carbide Tecrona thread holder
Core drill bit SC Tecrona threaded chuck Ruko
CREDRL-RUKO-108021C-TC-L84-D21
Register now and access more than 125,000 products
The Tecrona coating is the ideal coating for all drilling operations that place extreme stress on the tool. It adheres very well to the tool, which causes the wear protection coating to increase the surface hardness to approx. 4200 HV. The friction value is extremely low with this coating, which increases the service life with low wear.
Can be used in all upright and magnetic column drills with morse taper in conjunction with RUKO attachment holder no. 108 102 / 108 103 / 108 104 / 108 105 or with direct thread attachment, e.g. Fein KBM 542/KBM 65.
Datasheets(X)
RUKO core drills with Tecrona coating and carbide cutting edges are universally usable for non-hardened steels and superalloys (materials with very high alloying proportions of AL, Ti, nickel such as Inconel, Husteloy, Inox).
Quality | 0 - not applicable |
Cutting depth | 50.0 mm |
Diameter | 21.0 mm |
Length | 84 mm |
Cutting material | SC |
Last viewed
Steel nail with riveted washer and discontinuous longitudinal corrugation
Concrete screw with hexagon head and large disc W-BS/S
Welder clothing
Hexagon socket set screw with flattened tip ISO 4027, A4 stainless steel, 21H, plain
C 6.3 PH bit (1/4 inch)
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
Low-cut safety shoes, S2
Lido S3 safety shoes
Hexagon nut with fine thread DIN 934, steel I8I, plain
Ducting clamp Part 2 – Heavy series