Metal core drill bit Ruko solid carbide Tecrona thread holder
Core drill bit SC Tecrona threaded chuck Ruko
CREDRL-RUKO-108024C-TC-L84-D24
Register now and access more than 125,000 products
The Tecrona coating is the ideal coating for all drilling operations that place extreme stress on the tool. It adheres very well to the tool, which causes the wear protection coating to increase the surface hardness to approx. 4200 HV. The friction value is extremely low with this coating, which increases the service life with low wear.
Can be used in all upright and magnetic column drills with morse taper in conjunction with RUKO attachment holder no. 108 102 / 108 103 / 108 104 / 108 105 or with direct thread attachment, e.g. Fein KBM 542/KBM 65.
Datasheets(X)
RUKO core drills with Tecrona coating and carbide cutting edges are universally usable for non-hardened steels and superalloys (materials with very high alloying proportions of AL, Ti, nickel such as Inconel, Husteloy, Inox).
Quality | 0 - not applicable |
Cutting depth | 50.0 mm |
Diameter | 24.0 mm |
Length | 84 mm |
Cutting material | SC |
Last viewed
Rechargeable battery for cordless concrete vibrator
TIPP® Smartlock GS pipe clamp Without rubber inserts
Die For standard metric ISO thread HSCo Multi Performance
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 12.9, plain
Twist drill bit HSCo DIN 338 type RN bronze point thinning
TIPP® fixed point attachment With galvanised pipe clamps and threaded rods
Cartridge Adjustable for wire stripping pliers
Ring bolt H.Q.E. with variable screw length
Hexagonal bolt
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head with hexalobular drive