Metal core drill bit Ruko solid carbide Tecrona thread holder
Core drill bit SC Tecrona threaded chuck Ruko
CREDRL-RUKO-108031C-TC-L84-D31
Register now and access more than 125,000 products
The Tecrona coating is the ideal coating for all drilling operations that place extreme stress on the tool. It adheres very well to the tool, which causes the wear protection coating to increase the surface hardness to approx. 4200 HV. The friction value is extremely low with this coating, which increases the service life with low wear.
Can be used in all upright and magnetic column drills with morse taper in conjunction with RUKO attachment holder no. 108 102 / 108 103 / 108 104 / 108 105 or with direct thread attachment, e.g. Fein KBM 542/KBM 65.
Datasheets(X)
RUKO core drills with Tecrona coating and carbide cutting edges are universally usable for non-hardened steels and superalloys (materials with very high alloying proportions of AL, Ti, nickel such as Inconel, Husteloy, Inox).
Quality | 0 - not applicable |
Cutting depth | 50.0 mm |
Diameter | 31.0 mm |
Length | 84 mm |
Cutting material | SC |
Last viewed
EPS profile double cylinder
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, plain
Machine screw tap, through hole Ruko UNC DIN 2182 HSCo plain shape B
HPC solid carbide drill Speeddrill 4.0-Inox, DIN 6537K, 3xD short, 4 drill heels, with internal cooling
Fixanchor internal thread W-FAZ-IG/S - push-through installation
SECU Box uvex 9957502
Hexagonal bolt with shank ISO 4014, A4-50 and A4-70 stainless steel, plain
Steel door spindle 8 mm with M12 threaded roller and eccentric drill hole
Low-cut safety shoes, S1
Rubber plate For vehicle lifting platforms