Metal core drill bit Ruko solid carbide Tecrona thread holder
Core drill bit SC Tecrona threaded chuck Ruko
CREDRL-RUKO-108039C-TC-L84-D39
Register now and access more than 125,000 products
The Tecrona coating is the ideal coating for all drilling operations that place extreme stress on the tool. It adheres very well to the tool, which causes the wear protection coating to increase the surface hardness to approx. 4200 HV. The friction value is extremely low with this coating, which increases the service life with low wear.
Can be used in all upright and magnetic column drills with morse taper in conjunction with RUKO attachment holder no. 108 102 / 108 103 / 108 104 / 108 105 or with direct thread attachment, e.g. Fein KBM 542/KBM 65.
Datasheets(X)
RUKO core drills with Tecrona coating and carbide cutting edges are universally usable for non-hardened steels and superalloys (materials with very high alloying proportions of AL, Ti, nickel such as Inconel, Husteloy, Inox).
Cutting depth | 50.0 mm |
Diameter | 39.0 mm |
Length | 84 mm |
Cutting material | SC |
Last viewed
Straight pin with flat points DIN 7, steel plain (9 SMnPb 28 k or St 50 K), unhardened, tolerance class h8
Metric double open-end wrench DIN 3110/ISO 1085
Upper frame set Sundström R06-0802
Solid carbide rough cutter 35° Speedcut Aluminium, long, optional, three-lipped drill, uneven angle of twist gradient
Cut-resistant gloves Ansell HyFlex 11-931
Feather key, high shape DIN 6885, steel, plain, shape B
1-ear clamp with insert ring
Asbestos sheeting sack With skirting and fastener bands
Threaded rod, left-hand thread
Base height adjuster type EV-S for screwing on With electrical height adjustment using optional cordless pliers