Metal core drill bit Ruko solid carbide Tecrona thread holder
Core drill bit SC Tecrona threaded chuck Ruko
CREDRL-RUKO-108046C-TC-L84-D46
Register now and access more than 125,000 products
The Tecrona coating is the ideal coating for all drilling operations that place extreme stress on the tool. It adheres very well to the tool, which causes the wear protection coating to increase the surface hardness to approx. 4200 HV. The friction value is extremely low with this coating, which increases the service life with low wear.
Can be used in all upright and magnetic column drills with morse taper in conjunction with RUKO attachment holder no. 108 102 / 108 103 / 108 104 / 108 105 or with direct thread attachment, e.g. Fein KBM 542/KBM 65.
Datasheets(X)
RUKO core drills with Tecrona coating and carbide cutting edges are universally usable for non-hardened steels and superalloys (materials with very high alloying proportions of AL, Ti, nickel such as Inconel, Husteloy, Inox).
Quality | 0 - not applicable |
Cutting depth | 50.0 mm |
Diameter | 46.0 mm |
Length | 84 mm |
Cutting material | SC |
Last viewed
Euraseal I-720 interior window sealing tape
Slotted raised countersunk head screw DIN 964, brass, plain
Zinc clip-on wheel weight For car steel rims
Spray bottle
Twist drill bit HSCo DIN 338 MFD Speed
Work trousers
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Safety sandals S1 Jalas Respiro 3800R
Hexagon nut, inch
Concrete screw with pan head W-BS/S