Metal insulation dowel W-MDD
Steel insulation anchor W-MDD
DWL-(W-MDD)-(HDG)-D35MM-(200-250)-8X300
Register now and access more than 125,000 products
- Permitted loads under exposure to fire R30; R60; R90; R120.
- Tested fire resistance
- When attaching soft insulation materials that are not self-supporting, the insulation disc is simply pushed onto the insulation anchor.
- Quick and secure mounting thanks to 2-part construction
- Knock-in shaft has the design of a clamping sleeve and braces along the entire installation depth in the drill hole
- Surface of anchor head suitable for use as a plaster base
The insulation panels must be fastened with at least 4 anchors per square metre.
Datasheets(X)
With a German construction permit, the anchor may be used in a multiple attachment configuration to anchor insulation panels in cracked and non-cracked standard concrete with a strength class of at least C20/25 and max. C50/60.
 | |
Anchor diameter | 9 mm |
Anchor length (l) (l) | 300 mm |
Disc diameter | 35 mm |
Nominal drill-bit diameter (d 0) | 8 mm |
Embedding depth (h nom) | 40 mm |
Type description | W-MDD |
Material | Steel |
Max. attachment height (t fix) | 260 mm |
Centre-to-centre distance (a) | 120 mm |
Edge clearance (a r) | 60 mm |
Minimum component thickness (h min) | 80 mm |
Surface | Hot dip galvanized |
| Performance data | ||
| Anchor diameter (mm) | 8 | |
| Permissible load in concrete | Fperm [kN] = C20/25 – C50/601) | 0,074 |
| Max. weight/plate in concrete (for 4 anchors) | (kg) | 29.64) |
| Perm. load under exposure to fire2) | R30; Fperm [kN]2) | 0,07 |
| R60; Fperm [kN]2) | 0,07 | |
| R90; Fperm [kN]2) | 0,07 | |
| R120; Fperm [kN]2) | 0,06 | |
| Axis distance R30–R120 | scr, fi (mm)3) | 160 |
| Edge distance R30–R120 | c cr, fi (mm)3) | 80 |
| 1) Permissible load = zulF = RD/ΥRD with HyRD = 1.35 2) Under fire stress, the partial safety factor for the load-bearing capacity YM, fi is at least 1.0 3) If the fire affects more than one side, the edge distance must be ≥ 300 mm. 4) 29.6 kg corresponds to 0.296 kN | ||
| Designation | L [mm] | max tfix [mm] | PU/qty. | ||
| Insulation anchor steel hot dip galvanized Washer dia. 35 mm | 5921 008 080 | W-MDD 8x80 | 80 | 40 | 250 |
| 5921 008 110 | W-MDD 8x110 | 110 | 70 | 250 | |
| 5921 008 140 | W-MDD 8x140 | 140 | 100 | 250 | |
| 5921 008 170 | W-MDD 8x170 | 170 | 130 | 250 | |
| 5921 008 200 | W-MDD 8x200 | 200 | 160 | 250 | |
| 5921 008 250 | W-MDD 8x250 | 250 | 210 | 200 | |
| 5921 008 300 | W-MDD 8x300 | 300 | 260 | 200 | |
| Insulating material washer, steel, hot-dip galvanised washer dia. 80 mm | 5921 008 80 | W-MDD 80 | – | – | 250 |
| Insulation anchor, A2 stainless steel, washer dia. 35 mm | 5921 018 080 | W-MDD-R 8x80 | 80 | 40 | 250 |
| 5921 018 110 | W-MDD-R 8x110 | 110 | 70 | 250 | |
| 5921 018 140 | W-MDD-R 8x140 | 140 | 100 | 250 | |
| 5921 018 170 | W-MDD-R 8x170 | 170 | 130 | 250 | |
| 5921 018 200 | W-MDD-R 8x200 | 200 | 160 | 250 | |
| 5921 018 250 | W-MDD-R 8x250 | 250 | 210 | 200 | |
| 5921 018 300 | W-MDD-R 8x300 | 300 | 260 | 200 | |
| Insulating material washer, steel, A2 stainless steel washer dia. 80 mm | 5921 018 80 | W-MDD-R 80 | – | – | 250 |
| Installation parameters | ||
| Nominal drill bit diameter | d0 (mm) | 8 |
| Drilling surface diameter | dcut ≤ | 8,45 |
| Drill hole depth | h1 ≥ (mm) | 45 |
| Sleeve diameter | dh (mm) | 9 |
| Embedment depth | hef ≥ (mm) | 40 |
| Minimum component thickness | hmin ≥ (mm) | 80 |
| minimum edge distance | cmin ≥ (mm) | 60 |
| Minimum axis distance | smin ≥ (mm) | 120 |
Last viewed
Hexagonal bolt with thread up to the head
Hexagonal bolt
Work jacket Peter fleece jacket
Electronic side cutters, round head With wire clamp
Diesel injection cleaner
Combination filter A2P3R 923001 Moldex
Connector, pneumatic
Thread mandrel
Compartment separator For drawer cabinets
Countersunk slotted head screw, Z DIN 965, steel 4.8, zinc-plated, blue passivated (A2K)