Metal roofing anchoring point Anchor point Lock V standing seam
Anchor point ABS Lock V, standing seam
LOCK SEAM V (PF-5-ST) STANDINGSEAM
Register now and access more than 125,000 products
Secure all round on standing seam roofing with freely turning anchoring device. The Anchor point ABS Lock V offers you one anchoring point for 3 people on metal seam roofing. It is clamped firmly to the standing seam roofing on a single seam and ensures particular operating comfort: Its stainless steel eyelet can be freely rotated by 360°. The anchoring device is suitable for standing seam roofing from various manufacturers, e.g. Rheinzink or similar systems.
ST = for aluminium, titanium zinc and steel
CU = for copper standing seam
Datasheets(X)
This anchorage point protects roof workers on the edges or in areas where there is a risk of falling through (such as on domed roof lights). The special clamping assembly provides secure holding and protects the roof panels: You do not need to open or drill through the roof.
You can mount the Anchor point ABS Lock V on standing seam roofing made from sheet steel from a surface thickness of 0.5 mm. Stainless steel, copper and titanium zinc surfaces require a minimum thickness of 0.6 mm, aluminium roofs are suitable from 0.7 mm.
Material | Stainless steel |
Rod length | 0 mm |
EN standard | 795 |
Suitable for use in the following materials | Standing seam |
Type description | PF-5-ST |
Height | 0 mm |
Colour | Stainless steel coloured |
Surface | Stainless steel FINISH |
Last viewed
Flat cover cap, for hexalobular socket and AW drive
Hose clamp DIN 3017-1, shape A, W4, BASIC-Line
Hexagonal bolt with threading up to head ISO 4017, 12.9 steel with silver zinc-flake coating (ZFSHL)
Heat-shrink crimp connector assortment 180 pieces in system case 4.4.1
Hexagonal bolt with shank and fine thread ISO 8765, zinc plated 10.9 steel with thick-layer passivation (VZD)
ASS 18-1/2 inch HT cordless tangential impact wrench
Cut protection glove Uvex unidur 6659 foam
Hexagon nut DIN 934, hot-dip galvanised I8I steel
Hexagonal bolt with thread up to the head ASME B18.2.1, blue passivated zinc plated GR8 steel (A2K), UNC (comparable with ISO metric thread)
Full face mask