Welcome to Würth Aerospace Solutions For trade customers only
Metal universal anchor W-MG - DWL-(W-MG)-(A2K)-10X60 Metal universal anchor W-MG - DWL-(W-MG)-(A2K)-10X60
Metal universal anchor W-MG - DWL-(W-MG)-(A2K)-10X60 - 1
Metal universal anchor W-MG - DWL-(W-MG)-(A2K)-10X60 - 2

Metal universal anchor W-MG

Metal universal anchor W-MG
DWL-(W-MG)-(A2K)-10X60

Art.-no. 0905310
EAN 4011231850377
All versions
Prices for customers after login
Metal universal anchor W-MG

Art.-no. 0905310

Prices for customers after login
Quantity
PU
x 100 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Drop-in anchor for secondary attachments on porous surfaces, e.g. pumice, lightweight or aerated concrete. Zinc-plated steel
  • Can be used in various surfaces: Aerated concrete PB2/PB4, perforated tile, pumice stone, lightweight concrete

  • The anchor is knocked in until flush without predrilling in aerated concrete PB2

  • Simple installation

  • For use in pre-positioned installation

  • The W-MG 8 metal plug, in conjunction with the M8 stud screw, conforms to the requirements of the "TRGI" (German Technical Guidelines for Gas Installations). Item 3.3.7.2 of these guidelines stipulates the requirements for laying the inner pipes: "Pipe attachments must be fire resistant. The supporting parts of pipe attachments must be made of non-flammable materials."

  • Wood and particle board screws can be used
Proof of Performance
  • Fire resistance: F30, F60, F90 and F120 (anchoring base: ≥ Vertically perforated brick HLZ 12, hollow sand-lime brick ≥ KSL 12, ≥ aerated concrete, strength class 4)

  • Exposure to fire according to DIN 4102-2:1977-09 (uniform temperature time curve)
Application area
Pipe suspensions with stair bolts in autoclaved aerated concrete

Drill the hole

Insert peg

Knock in anchor until flush

Screw in the screw

Screw on pipe clamp

Set anchor in place

With G2 aerated concrete, knock in without predrilling

Screw in the screw

Screw on pipe clamp
  • Fire resistance: F30, F60, F90 and F120 (anchoring base: ≥ Vertically perforated brick HLZ 12, hollow sand-lime brick ≥ KSL 12, ≥ aerated concrete, strength class 4)

  • Exposure to fire according to DIN 4102-2:1977-09 (uniform temperature time curve)
Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area
  • Attachment of pipe systems, including in the ceiling area (unapproved)

  • Attachment of gas pipes

  • Attachment of water lines and pipe clamps

Anchor diameter

10 mm

Anchor length (l) (l)

60 mm

Nominal drill-bit diameter in PB 4 (d 0)

8 mm

Nominal drill-bit diameter in perforated brick (d 0)

14 mm

Nominal drill-bit diameter in pumice (d 0)

12 mm

Drill hole depth (t)

65 mm

Embedding depth (h s)

60 mm

Thread diameter (d thr)

10 mm

Performance data
Anchor diameter [mm]56810
Total length l [mm]30,532386060
60---0,600,550,800,60
90---0,400,400,500,50
120---0,300,300,400,40
Recommended working loadAerated concrete ≥ PB2Frec. [kN]0,200,220,400,470,52
Aerated concrete ≥ PB40,400,420,720,971,20
Hollow bricks0,350,370,520,550,60
Pumice0,220,300,400,400,40
Fire resistance in accordance with DIN 4102-2Fire resistance rating t in minutes Autoclaved aerated concrete ≥ PB4 (EN 771-4)Hollow sand-lime block KSL (DIN EN 771-2) and vertically perforated brick HLZ (DIN 105-100, EN 771-1)Autoclaved aerated concrete ≥ PB4 (EN 771-4)Hollow sand-lime block KSL (DIN EN 771-2) and vertically perforated brick HLZ (DIN 105-100, EN 771-1)
30---0,800,551,000,60
Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
MFD-S multi-purpose drill bit with straight shank
MFD-S multi-purpose drill bit with straight shank

DRL-GENPURP-MFDS-D10-L120-WL80MM

ZEBRA
Drills through virtually any material
MFD-S multi-purpose drill bit with straight shank
MFD-S multi-purpose drill bit with straight shank

DRL-GENPURP-MFDS-D14-L220-WL150MM

ZEBRA
Drills through virtually any material
x 1 pcs
MFD-S multi-purpose drill bit with straight shank
MFD-S multi-purpose drill bit with straight shank

DRL-GENPURP-MFDS-D3-L60-WL30MM

ZEBRA
Drills through virtually any material
MFD-S multi-purpose drill bit with straight shank
MFD-S multi-purpose drill bit with straight shank

DRL-GENPURP-MFDS-D4-L75-WL39MM

ZEBRA
Drills through virtually any material
MFD-S multi-purpose drill bit with straight shank
MFD-S multi-purpose drill bit with straight shank

DRL-GENPURP-MFDS-D5-L85-WL39MM

ZEBRA
Drills through virtually any material
MFD-S multi-purpose drill bit with straight shank
MFD-S multi-purpose drill bit with straight shank

DRL-GENPURP-MFDS-D6-L100-WL54MM

ZEBRA
Drills through virtually any material
MFD-S multi-purpose drill bit with straight shank
MFD-S multi-purpose drill bit with straight shank

DRL-GENPURP-MFDS-D8-L120-WL80MM

ZEBRA
Drills through virtually any material
Multi-purpose drill bit MFD-S Plus
Multi-purpose drill bit MFD-S Plus

DRL-GENPURP-MFDS-PLUS-D10-L160-WL100MM

ZEBRA
Drills through virtually any material
x 1 pcs
Multi-purpose drill bit MFD-S Plus
Multi-purpose drill bit MFD-S Plus

DRL-GENPURP-MFDS-PLUS-D12-L160-WL100MM

ZEBRA
Drills through virtually any material
x 1 pcs
Multi-purpose drill bit MFD-S Plus
Multi-purpose drill bit MFD-S Plus

DRL-GENPURP-MFDS-PLUS-D14-L160-WL100MM

ZEBRA
Drills through virtually any material
x 1 pcs
Multi-purpose drill bit MFD-S Plus
Multi-purpose drill bit MFD-S Plus

DRL-GENPURP-MFDS-PLUS-D6-L110-WL50MM

ZEBRA
Drills through virtually any material
x 1 pcs
Multi-purpose drill bit MFD-S Plus
Multi-purpose drill bit MFD-S Plus

DRL-GENPURP-MFDS-PLUS-D8-L110-WL50MM

ZEBRA
Drills through virtually any material
x 1 pcs
Machinists' hammer with protective handle sheath
Machinists hammer with protective handle sheath

CRSPHAM-COVER-800G

German type in line with DIN 1041 with double-curved hickory handle
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details