Metric double-end flare-nut wrench Bi-hex with POWERDRIV®
Open double-end flare-nut wrench bi-hexagon
DBENDFLARNUTWRNCH-OPN-METR-12PT-WS14X17
ZEBRA
Register now and access more than 125,000 products
Ergonomic double-end flare-nut wrench for demanding work
- The union nut wrench has a deep, 15° offset and an arc swing of 5° on the box end for efficient power transmission even in hard-to-reach places
- The design saves time and effort
Standard compliant and particularly high quality
- The double-end flare-nut wrench complies with DIN 3118
- With proven chromium-vanadium steel
- The surfaces have a matt chrome plated finish for a firm grip even with oily hands
- The box ends are also polished
- The surface is permanently resistant to rust and ensures a far longer than average service life
- The long-term usability of the double-end flare-nut wrench reduces costs of replacement and storage
Datasheets(X)
Tightening and loosening union nuts and pipe screw joints
 | |
Width across flats (SW) | 14 x 17 mm |
Length (L) | 195 mm |
Ring thickness (a1) | 11 mm |
Ring thickness 2 (a2) | 12.5 mm |
External diameter of ring (b1) | 27.4 mm |
External diameter of ring 2 (b2) | 31.4 mm |
Min. ring opening (B1 min) | 11 mm |
Min. ring opening 2 (B2 min) | 14 mm |
Material | Chrome-vanadium steel |
Surface | Chrome plated |
Last viewed
Spiral clamping pin, standard design ISO 8750 A2 stainless steel plain
Dry wall screw with double-start thread
Sleeve nut, pan head W-0392, brass, nickel-plated (E2J)
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Threaded rod DIN 976, A2-70 stainless steel, shape A
Cylindrical pin, unhardened DIN 7, A4 stainless steel, plain
Groove cutter for wood With cutting bit
Safety screw with hexalobular head and pin Similar to ISO 10642 because of TX drive, A2 stainless steel, plain
Steering castor With locking device for shelf trolleys and table trolleys
Slotted flat-head screws with large head DIN 921, steel 5.8, zinc-plated, blue passivated (A2K)