Milling bit Ruko tungsten carbide milling bit type A cylinder (ZYAS) with spur cut plain
TC milling bit type A cyl. w. spur cut plain Ruko
CTR-ZYA-RUKO-116017-HM-D10
Register now and access more than 125,000 products
The cross-toothing results in a higher chip performance compared to plain toothing. This has a positive effect, especially with materials that are difficult to machine.
For high-alloy, rust-resistant, acid-resistant and heat-resistant steels, cast iron and plastics.
For deburring, edge breaking, plaster and welding seam processing and surface processing.
Form | Cylindrical shape with spur cut |
Length | 60 mm |
Shank diameter | 6.0 mm |
Surface | Plain |
Shank style | Cylindrical |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Low-cut safety shoes, S3
Countersunk screw with hexalobular head
Straight male fitting ISO 8434-1, stainless steel 1.4571, BSPP male thread with seal
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Akura 44 profile thumbturn cylinder
Slotted cheese head DIN 84, brass, plain
THM 413 holding magnet
Engine oil TRIATHLON® Endurance III 5W-30
Floor panel with integrated lashing rails
HSCo8 keyway end mill, long, triple blade, centre-cutting DIN 844L
