Milling bit Ruko tungsten carbide milling bit type C rounded roller (WRC) plain
Tung. carb. mil. bit type C rnded rllr plain Ruko
BURR-WCR-RUKO-116022B-HM-D10
Register now and access more than 125,000 products
The cross-toothing results in a higher chip performance compared to plain toothing. This has a positive effect, especially with materials that are difficult to machine.
Datasheets(X)
For high-alloy, rust-resistant, acid-resistant and heat-resistant steels, cast iron and plastics.
For deburring, edge breaking, plaster and welding seam processing and surface processing.
Form | Cylindrical shape |
Length | 60 mm |
Shank diameter | 6 mm |
Surface | Plain |
Shank style | Cylindrical |
Last viewed
Threaded fitting
Low-cut safety shoes, S1
Safety boots, S2
Countersunk rivet
HSCo keyway cutter DIN 850D
Foot air pump
Pocket slide calliper With bottom locking screw and round depth gauge
Low-cut safety shoes, S3
Half-shell hexagon crimping insert
Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened