Milling bit Ruko tungsten carbide milling bit type C rounded roller (WRC) plain
Tung. carb. mil. bit type C rnded rllr plain Ruko
BURR-WCR-RUKO-116024B-HM-D16
Register now and access more than 125,000 products
The cross-toothing results in a higher chip performance compared to plain toothing. This has a positive effect, especially with materials that are difficult to machine.
Datasheets(X)
For high-alloy, rust-resistant, acid-resistant and heat-resistant steels, cast iron and plastics.
For deburring, edge breaking, plaster and welding seam processing and surface processing.
Form | Cylindrical shape |
Length | 65 mm |
Shank diameter | 6 mm |
Surface | Plain |
Shank style | Cylindrical |
Last viewed
Lock washer For shafts, DIN 6799, stainless steel 1.4122
Threaded rod DIN 976, A2-70 stainless steel, shape A
Screw seal, self-centring
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Compartment divider
EPS profile double cylinder
EPS profile thumbturn cylinder
HSCo8 keyway end mill, short, twin blade, centre-cutting DIN 327D
Fall arrester device Pro with steel cable
Cover cap