Milling bit Ruko tungsten carbide milling bit type E droplet (TRE) plain
Tungsten carbide mil. bit type E drop plain Ruko
CTR-TRE-RUKO-116215-HM-D16
Register now and access more than 125,000 products
The cross-toothing results in a higher chip performance compared to plain toothing. This has a positive effect, especially with materials that are difficult to machine.
Datasheets(X)
For high-alloy, rust-resistant, acid-resistant and heat-resistant steels, cast iron and plastics.
For deburring, edge breaking, plastering and welding seam processing and surface processing.
Form | Drop shape |
Length | 70 mm |
Shank diameter | 6.0 mm |
Surface | Plain |
Shank style | Cylindrical |
Last viewed
Countersunk screw with hexagon socket, galvanised ISO 10642, steel 10.9, zinc-plated, blue passivated (A2K)
Fire protection duct inner corner I30/I60/I90/I120
Cylindrical pin, hardened DIN 6325, steel, plain
HPC end mill with corner radius, Speedcut 4.0-Inox, long, optional, four cutting edges, uneven angle of twist gradient
Heavy-duty floor marking Point roll
TIPP® robust pipe clamp, hot-dip galvanised
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagonal nut with flange and clamping piece (all-metal) according to MBN standard
Screw with flattened half round head with hexagon socket, imperial
Identification rings, PVC