Milling bit Ruko tungsten carbide milling bit type G ogival (SPG) TiCN
Tungsten carbide mil. bit type G ogival TiCN Ruko
CTR-SPG-RUKO-116026TC-HM-TICN-D8
Register now and access more than 125,000 products
The surface hardness of the tool is increased by the TiCN wear protection coating to approx. 3000 HV/micro-hardness and the heat resistance up to 400°C. This increases service life and productivity.
Datasheets(X)
For high-alloy, rust-resistant, acid-resistant and heat-resistant steels, cast iron and plastics.
For deburring, edge breaking, plastering and welding seam processing and surface processing
Form | Ogive shape |
Length | 60 mm |
Shank diameter | 6.0 mm |
Surface | TiCN |
Shank style | Cylindrical |
Last viewed
Nova Pro OrgaAer full-extension slide With integrated soft-close system
3/4 inch grooved nut wrench basic body For removal and installation work on the rear axle
W-TEC® INSERT COIL — tang break-off tool
External and internal puller set
Blade, serrated
Manual taper tap Ruko hand tap HSS DIN 2181 fine thread taper tap
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
Saddle washer for trapezoidal profile
EPS profile thumbturn cylinder
Transport rollers For aluminium standing ladder with steps, riveted/aluminium single ladder with steps, riveted