Milling bit Ruko tungsten carbide milling bit type G ogival (SPG) TiCN
Tungsten carbide mil. bit type G ogival TiCN Ruko
CTR-SPG-RUKO-116029TC-HM-TICN-D16
Register now and access more than 125,000 products
The surface hardness of the tool is increased by the TiCN wear protection coating to approx. 3000 HV/micro-hardness and the heat resistance up to 400°C. This increases service life and productivity.
Datasheets(X)
For high-alloy, rust-resistant, acid-resistant and heat-resistant steels, cast iron and plastics.
For deburring, edge breaking, plastering and welding seam processing and surface processing
Form | Ogive shape |
Length | 70 mm |
Shank diameter | 6.0 mm |
Surface | TiCN |
Shank style | Cylindrical |
Last viewed
Hexagonal bolt with thread up to the head
Hexagonal bolt with thread up to the head ISO 4017, brass, nickel-plated
Shell end mill HSCo DIN 1880 type HR TiAlN
Pipe cable lug Without inspection hole
Straight partition plug connector
Raised contersunk head tapping screw, C shape with H recessed head DIN 7983, A2 stainless steel, plain. With cross recess.
Bollard base
W-VIZ-A anchor rod, A4 stainless steel for W-VIZ/A4 injection systems (concrete)
Hexagonal bolt with shank ISO 4014, A4-50 and A4-70 stainless steel, plain
Castellated nut DIN 935, steel 10, zinc-plated, blue passivated (A2K)