Milling bit Ruko tungsten carbide milling bit type H flame (FLH) plain
Tungsten carbide mil. bit type H flame plain Ruko
CTR-FLH-RUKO-116218-HM-D8
Register now and access more than 125,000 products
The cross-toothing results in a higher chip performance compared to plain toothing. This has a positive effect, especially with materials that are difficult to machine.
Datasheets(X)
For high-alloy, rust-resistant, acid-resistant and heat-resistant steels, cast iron and plastics.
For deburring, edge breaking, plastering and welding seam processing and surface processing.
Form | Flame configuration |
Length | 65 mm |
Shank diameter | 6.0 mm |
Surface | Plain |
Shank style | Cylindrical |
Last viewed
Work trousers
Rear stop For large-compartment rack
Stirrup handle on outer plate
Twist drill bit HSS DIN 1897 type RN
EPS profile double cylinder
FFF spare part UltiMaker CC S7/S5/S3/3 print core
Circlip DIN 472
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Box-end wrench with square insert shank 9x12 mm
Intensive wheel rim cleaner For all painted and unpainted light metal wheel rims and steel rims