Milling bit Ruko tungsten carbide milling bit type L radius end (KEL) plain
Tung. carb. mil. bit type L rnd. cone plain Ruko
CTR-RDTAP-RUKO-116232-HM-D3
Register now and access more than 125,000 products
The cross-toothing results in a higher chip performance compared to plain toothing. This has a positive effect, especially with materials that are difficult to machine.
Datasheets(X)
For high-alloy, rust-resistant, acid-resistant and heat-resistant steels, cast iron and plastics.
For deburring, edge breaking, plastering and welding seam processing and surface processing.
Form | Cone with rounded end |
Length | 38 mm |
Shank diameter | 3.0 mm |
Surface | Plain |
Shank style | Cylindrical |
Last viewed
Colour – blind rivets Round pan head
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc flake, silver (ZFSHL)
System assortment 2.4.1 socket wrench 1/4 inch and 3/8 inch 22 pieces
Hole puncher with splitting punch Metric ISO sizes in accordance with EN 50262
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Wire end ferrule without plastic sleeve DIN 46228 Part 1
Jacket Planam Plaline
Crimp cable lug, ring shape Polyamide insulated
Work trousers
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain