Milling bit Ruko tungsten carbide milling bit type L radius end (KEL) plain
Tung. carb. mil. bit type L rnd. cone plain Ruko
CTR-RDTAP-RUKO-116235-HM-D10
Register now and access more than 125,000 products
The cross-toothing results in a higher chip performance compared to plain toothing. This has a positive effect, especially with materials that are difficult to machine.
For high-alloy, rust-resistant, acid-resistant and heat-resistant steels, cast iron and plastics.
For deburring, edge breaking, plastering and welding seam processing and surface processing.
Form | Cone with rounded end |
Length | 65 mm |
Shank diameter | 6.0 mm |
Surface | Plain |
Shank style | Cylindrical |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Straight male fitting ISO 8434-1, zinc-nickel-plated steel, BSPP male thread with metallic sealing edge, shape B
CERALINE vulcanised fibre disc
Nova Pro Scala H186 frame set
Hexagonal bolt with flange DIN 6921, steel 8.8, zinc-plated, blue passivated (A2K)
Work dungarees
Universal coarse-knit glove
Stirrup handle On exterior plate
Hexagonal nut, low profile
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc flake, silver (ZFSHL)
