Milling bit Ruko tungsten carbide milling bit type M pointed cone (SKM) TiCN
Tung. carb. mil. bit type M pointed cone TiCN Ruko
CTR-SKM-RUKO-116036TC-HM-TICN-D8
Register now and access more than 125,000 products
The surface hardness of the tool is increased by the TiCN wear protection coating to approx. 3000 HV/micro-hardness and the heat resistance up to 400°C. This increases service life and productivity.
Datasheets(X)
For high-alloy, rust-resistant, acid-resistant and heat-resistant steels, cast iron and plastics.
For deburring, edge breaking, plastering and welding seam processing and surface processing
Form | Conical pointed |
Length | 60 mm |
Shank diameter | 6 mm |
Surface | TiCN |
Shank style | Cylindrical |
Last viewed
Work dungarees
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, zinc-plated, blue passivated (A2K)
ASSY® 4 COMBI timber screw Steel zinc plated partial thread hexagon head
Hexagonal bolt with shank ISO 4014, A4-50 and A4-70 stainless steel, plain
HSCo type N double-cut side and face milling cutter DIN 885A
Wood screw Hexagon head DIN 571, steel hot-dip galvanised
EPS profile double cylinder for keyed-alike original systems
Grooved cylindrical pin with chamfer ISO 8740, A1 stainless steel
Trolley PRO
Belleville washer DIN 2093, stainless steel 1.4310