Milling bit Ruko tungsten carbide milling bit type M pointed cone (SKM) TiCN
Tung. carb. mil. bit type M pointed cone TiCN Ruko
CTR-SKM-RUKO-116037TC-HM-TICN-D10
Register now and access more than 125,000 products
The surface hardness of the tool is increased by the TiCN wear protection coating to approx. 3000 HV/micro-hardness and the heat resistance up to 400°C. This increases service life and productivity.
Datasheets(X)
For high-alloy, rust-resistant, acid-resistant and heat-resistant steels, cast iron and plastics.
For deburring, edge breaking, plastering and welding seam processing and surface processing
Form | Conical pointed |
Length | 60 mm |
Shank diameter | 6.0 mm |
Surface | TiCN |
Shank style | Cylindrical |
Last viewed
A 502 FS door handle
Raised countersunk head screw with H recessed head DIN 966, steel 4.8, zinc-plated, blue passivated (A2K)
High-visibility trousers
Straight metric VDE single open-end wrench
RW® bit
Countersunk washer/washer, deep zinc plated blue
VDE screwdriver, flat slotted, ultra slim
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
Frame Nova Pro Scala H90 For H90 drawers
Hexagonal bolt with shank SB FITTINGS DIN EN 15048-1 ISO 4014, steel 8.8U, hot-dip galvanised, with nut ISO 4032