Milling bit Ruko tungsten carbide milling bit type M pointed cone (SKM) TiCN
Tung. carb. mil. bit type M pointed cone TiCN Ruko
CTR-SKM-RUKO-116039TC-HM-TICN-D16
Register now and access more than 125,000 products
The surface hardness of the tool is increased by the TiCN wear protection coating to approx. 3000 HV/micro-hardness and the heat resistance up to 400°C. This increases service life and productivity.
Datasheets(X)
For high-alloy, rust-resistant, acid-resistant and heat-resistant steels, cast iron and plastics.
For deburring, edge breaking, plastering and welding seam processing and surface processing
Form | Conical pointed |
Length | 70 mm |
Shank diameter | 6.0 mm |
Surface | TiCN |
Shank style | Cylindrical |
Last viewed
Work jacket
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Torque wrench with 14 x 18 mm square insert shank mount
Push-to-move WingLine S magnetic tumbler, screw-on
Work coat
Hexagon socket set screw with truncated cone ISO 4026 A4 stainless steel 21H, plain
Hole saw Ruko tungsten carbide multigrade hole saw
Mixer nozzle extension WIT-MV
Work coat
Work coat