Milling bit assortment/set Ruko 116003TC 10 pieces TiCN
TC milling bit set TiCN 10 pcs. 116003TC Ruko
CTR-RUKO-116003TC-HM-TICN-D10/12
Register now and access more than 125,000 products
The surface hardness of the tool is increased by the TiCN wear protection coating to approx. 3000 HV/micro-hardness and the heat resistance up to 400°C. This increases service life and productivity.
- 2 x type A cylinder (ZYA) without spur cut, dia. D1 10.0/12.0 mm
- 2 x type C rounded roller (WRC), dia. D1 10.0/12.0 mm
- 2 x type G ogival (SPG), dia. D1 10.0/12.0 mm
- 2 x type F round arc (RBF), dia. D1 10.0/12.0 mm
- 1 x type M tip cone (SKM), dia. D1 12.0 mm
- 1 x type D spherical (KUD), dia. D1 12.0 mm
Datasheets(X)
For high-alloy, rust-resistant, acid-resistant and heat-resistant steels, cast iron and plastics.
For deburring, edge breaking, plaster and welding seam processing and surface processing.
Number of pieces in assortment/set | 10 PCS |
Surface | TiCN |
Last viewed
Split pin ISO 1234 A2 stainless steel
Stirrup handle on outer plate
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Hole saw Ruko bimetal HSCo8 with fine toothing
Hexagonal nut with flange and clamping piece (all-metal) according to MBN standard
Adjustable straight sealing cone reducer fitting ISO 8434-1, stainless steel 1.4571, cutting ring connection with o-ring
Button-head rivet
EPS profile double cylinder
Sidewall lining